EtherWAN
Audio/video-converter
INJ90BT-24
EtherWAN INJ90BT-24 Handleiding
Hier is de EtherWAN INJ90BT-24 (Audio/video-converter) gebruikershandleiding. 1 pagina's in taal met een gewicht van 215,321.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/1
Copyright 2020 EtherWAN Systems, Inc. Page 1
All Rights Reserved
INJ90BT-24
1/6/2020
INJ90BT-24 Hardened PoE Injector
Installation Guide
1 Unpacking
Unpack the items. Your package should
include:
One INJ90BT-24 PoE Injector
Power input terminal block
Wall and DIN-Rail mounting hardware
brackets
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton
and packing material.
More information available at:
https://www.etherwan.com/us
For warranty information, visit:
https://www.etherwan.com/us/support/war
ranty-policy
2 Equipment Needed
Category 5e or better cable for RJ-45
ports
Power supply with supplied voltage within
specified range of 24 to 56VDC
3 Select a Location
DIN-rail installations: Attach the bracket
on the unit using the included screws and
then mount on a DIN-rail.
Wall installations: Attach the brackets on
the unit using the included screws and
then mount on a wall.
Identify a power source within 6 feet (1.8
meters).
Choose a dry area with ambient
temperature between -40 and 75ºC (-40
and 167ºF).
Keep away from heat sources, sunlight,
warm air exhausts, hot-air vents, and
heaters.
Make sure there is adequate airflow.
4 Connect to the Ports
The INJ90BT-24 has the following ports:
2 10/100/1000 Mbps copper ports
10/100/1000BASE-T Ports
Port labeled “Data” can be connected to a
switch or a router. Port labeled “Power” can
be connected to a PoE device (PD).
5 Connect Power
Terminal Block
Connect the unit to a suitable power supply
using appropriate wire, 18-24AWG, rated for
105°C or higher.
Redundant power is supported. However,
only one power input is required to operate
the unit.
1. Connect power wires to the
appropriate V1+/- or V2+/- pins on
the terminal block.
2. Connect the grounding wire to the
ground screw.
3. Plug the terminal block into the
socket.
6 Front Panel LEDs
LED Panel Layout
LED Color Status
Power
1 & 2
Green ON = power detected
OFF = power not detected
PoE Amber ON = PD is detected
Off = No PD detected
Probleemoplossing EtherWAN INJ90BT-24
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | EtherWAN |
| Categorie: | Audio/video-converter |
| Model: | INJ90BT-24 |