Imarflex
Niet gecategoriseerd
IDC-1810
Imarflex IDC-1810 Handleiding
Hier is de Imarflex IDC-1810 (Niet gecategoriseerd) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 1,182,460.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
5. After use, Press the “ON/OFF” key to switch back to sleeping mode.
6. Unplug the unit after every use.
PARAMETER TABLE:
FUNCTION
DEFAULT
(POWER / TEMP)
ADJUSTABLE
(POWER / TEMP)
TIMER
PRESET
TIMER
H POT OT
2000W
200 - 2000W
0:01-4:00
STIR-FRY
600°C
80°C - 600°C
0:01-4:00
BBQ
520°C
80°C - 600°C
0:01-4:00
STEW
1300W
200W - 2000W
0:01-4:00
SOUP
1600W
-
-
0:01-24:00
PORRIDGE
1300W
-
-
0:01-24:00
WARM
80°C
-
-
0:01-24:00
CLEANING AND MAINTENANCE:
1. Turn o the power and pull out the plug before cleanin g.
2. Wait for the unit to cool down before cleaning.
3. Select proper detergent to remove the dirt.
4. Use neat wet cloth to clean the unit after removing the dirt.
5. Do not clean the unit directly with water.
6. Clean the cooking plate and pan before cooking. Otherwise, dirt after charring is dicult to
clean and the plate may get discoloration.
7. You may clean air vent or air entry’s dirt by vacuum cleaner to suck up or by cotton. If there
is dirt with oil, it is right to use toothbrush with a little detergent to clean the surface. Never
clear inside with water or any kind of liquid.
8. Do not use caustic detergents to clean the unit. It may damage the unit by chemical reactio n.
9. Do not use benzene, thinner, scrubbing brush or polishing powder to clean the induction
cooker.
TROUBLESHOOTING:
PROBLEM
POSSIBLE CAUSE
RECOMMENDATION
No Power
Indicator
Power cord not properly plugged
Kindly make sure that the power cord
is properly plugged
Automatically
switched OFF
Overload Protection
No operation for more than 2h rs
Unplug the unit and wait for about
two minutes before plugging in.
Bring the unit to the nearest Imarex
Service Center
E1
Voltage too low
Unplug the unit and wait for about
two minutes before plugging in.
E2
Voltage too high
Unplug the unit and wait for about
two minutes before plugging in.
E3/E5
Temperature in the cooking plate is
too high
Wait for a few minutes to let the
cooking plate cool down.
Bring the unit to the nearest Imarex
Service Center
REMINDER: Please do not forget to ll up and send the warranty card with receipt to our email
address imarexfb@evergoodinc.com
Distributed By: Topgadget Distributions, Inc.
2120 A.linao St., Malate, Manila
Made in China
Probleemoplossing Imarflex IDC-1810
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | Imarflex |
| Categorie: | Niet gecategoriseerd |
| Model: | IDC-1810 |