Kramer
AV extender
SID-DP
Kramer SID-DP Handleiding
Hier is de Kramer SID-DP (AV extender) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 0.6 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
The Kramer SID- DisplayPort Step-In Commander DP
Congratulations on purchasing your Kramer DigiTOOLS
® SID-DP DisplayPort Step-In
Commander which is ideal for boardrooms and presentation rooms.
The Kramer is an HDCP compliant DisplayPort and unbalanced stereo audio SID-DP
remote device that used to remotely take control of a compatible switcher, for is
example, the Kramer . The commander does not need a power adapter if VP-81SID
located within 50m ( ft) of the switcher. 164
Figure 1 Table 1 and define the . SID- DP DisplayPort Step-In Commander
Figure 1 SID- DisplayPort Step-In Commander Front and Rear Panel : DP
Table 1 SID- DisplayPort Step-In Commander Front and Rear Panel Features : DP
#
Feature
Function
1
AUDIO INPUT 3.5mm Mini Jack
Connect to the unbalanced stereo audio source
2
DP INPUT DisplayPort Connector
Connect to the video source DP
3
STEP Button IN
Press to switch the input to this remote control commander The .
button lights when active
4
ON LED
Lights green when the unit receives power
5
LINE OUT Twisted Pair RJ-45
Connector
Connect to the TP input of compatible switcher (for example, the a
VP-81SID) using CAT 6 or higher specification cable
6
Remote Switch Terminal Block
Connections (pins 2 and 3)
Connect to the remote step-in switch
7
12V DC Power Connector
Connect to the power adapter
8
Remote LED Terminal Block
Connections (pins 1 and 2)
Connect to the remote LED (observe correct polarity, pin 1 to the
LED anode and pin 3 to the cathode)
Figure 2 illustrates how to connect the to a source switcher, and remote switch SID-DP ,
and LED.
Figure 2 SID- Wiring Connections : DP
To connect the SID- as illustrated in : DP Figure 2
1. Connect the DP video source (for example, a laptop graphics source to the )
DisplayPort connector on the front panel of the . SID-DP
2. Connect the unbalanced stereo audio source (for example, a laptop graphics source)
to the 3.5mm mini jack AUDIO INPUT connector on the front of the SID-DP.
3. Using STP cable, connect the LINE OUT RJ- TP connector on the rear panel of 45
the to the required input on the rear panel of the (up to 50m SID-DP VP-81SID
away).
4. Optional Connect the terminal block on the rear of the to the remote —S -ID DP
switch and LED.
Note: The LED supply includes a current limiting resistor and is designed to work
with any standard LED.
5. Connect the power adapter to the 12V DC connector on the rear of the and SID-DP
to the mains electricity (if the distance exceeds 50m ( ft) from the switcher). 164
Probleemoplossing Kramer SID-DP
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Gewicht: | 300 g |
| Soort: | AV-zender |
| Maximum resolutie: | - Pixels |
| Aansluiting voor netstroomadapter: | Ja |
| Audio-ingangen: | 1 |
| RJ-45 uitgang ports: | 1 |
| Afmetingen (B x D x H): | 120 x 70 x 24 mm |
| AC-ingangsspanning: | 12 V |
| Ondersteundende kabel types: | Cat6, Cat7 |