Kramer VM-4DKT Handleiding
Hier is de Kramer VM-4DKT (Receiver) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 0.5 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
VM-4DKT Quick Start
P/N:
2900- 301544QS
Rev:
1
Scan for full manual
VM-4DKT Quick Start Guide
This guide HELPS you install and use your VM-4DKT for the first time.
Go to www.kramerav.com/downloads/VM-4DKT to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check in the b what’s ox
VM-4DKT 1:4 4K HDMI/DGKAT Distribution Amplier Transmitter
4 Rubber feet
1 Quick start guide
1 Power cord and adapter
IMPORTANT NOTICE!
We highly recommend using only Kramer UNIKAT cables with these products. If using 3
rd party shielded CAT-6A cables, both ends of the
shield must be soldered to the connectors for the products to function properly. Do not use any jumpers, unshielded wall plates or mid-
span cable connections. These extenders are not compatible with HDBaseT technologies. Prior to signal extension, ensure that the
extension line cable is lying straight and not coiled.
Step 2: Get to know your -4DKT VM
#
Feature
Function
1
STATUS LED
Red Power . –up
Green Power is –on.
2
ACTIVE EDID LED
The LED color indicates the active EDID type. When ashing, the state is in the
process of being activated.
Yellow Default EDID. –
Blue Output-acquired EDID. –
Green Custom EDID. –
3
INPUT LED
On Input signal detected. –
Flashing Source connected, but no signal detected. –
4
HDMI IN Connector
Connect to an HDMI source.
5
LOOP Connector
Connect to a local HDMI display.
6
DGKAT2 OUTPUTS Connectors (x4)
Connect to a DGKat-2.0 receiver (for example, ) using twisted pair cable. PT-872xr
7
SERVICE 3-pin terminal block
Connect to a serial controller.
8
SETUP DIP-switches
Sets the device behavior (see Step 6: Operate -4DKTVM ).
9
Fan Vent
For heat ventilation.
10
12V DC Power Connector
Connect the V DC power adapter into the device and then connect it to the 12
mains.
Step 3: Mount -4DKT VM
Install -4DKT using one of the following methods: VM
• Attach the rubber feet and place the unit on a at
surface.
• Ensure that the environment (e.g., maximum ambient temperature & air ow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
• Maximum mounting height for the device is 2 meters.
Probleemoplossing Kramer VM-4DKT
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Gewicht: | 500 g |
| Breedte: | 214.6 mm |
| Diepte: | 163 mm |
| Hoogte: | 43.6 mm |
| Gewicht verpakking: | 1300 g |
| Breedte verpakking: | 345 mm |
| Diepte verpakking: | 165 mm |
| Hoogte verpakking: | 52 mm |
| LED-indicatoren: | Ja |
| Stroom: | 2.8 A |
| HDCP: | Ja |
| Temperatuur bij opslag: | -40 - 70 °C |
| Rack-montage: | Ja |
| HDMI in: | 1 |
| RJ-45 uitgang ports: | 1 |
| Max. overdrachtssnelheid: | 18 Gbit/s |
| Bandbreedte: | - MHz |
| Aantal HDMI-uitgangen: | 1 |
| Bedrijfstemperatuur (T-T): | 0 - 40 °C |
| Relatieve vochtigheid in bedrijf (V-V): | 10 - 90 procent |