Microchip
Niet gecategoriseerd
ATA8350
Microchip ATA8350 Handleiding
Hier is de Microchip ATA8350 (Niet gecategoriseerd) gebruikershandleiding. 18 pagina's in taal Engels met een gewicht van 3.6 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/18
ATA8350
ATA8350 Demo and Evaluation Kit
Introduction
This user’s guide describes the use of the ATA8350 Demo and Evaluation kit for the ATA8350 Ultra-Wideband (UWB)
transceiver device. This kit includes at least two different UWB nodes, each using a SAM Cortex
®-M0 MCU to control
the ATA8350 device. The Prover and Verifier nodes are set up as follows:
• Prover node – Must start before the Verifier node, and responds with a telegram once the verifier telegram is
received. The measurement cycle finishes when the verifier receives the response telegram or when a timeout
occurs.
• Verifier node – Shows the distance measurement data for distance-bounding measurements (single shot
measurement) or localization (averaged measurement).
Demo software for distance measurements and data telegram transfer is available for this demo kit. In addition, this
kit has an evaluation and a test software package.
The ATA8350 Demo and Evaluation kit comes in two variants:
• Variant A – Comes with one Prover node
• Variant B – Comes with a maximum of five Prover nodes
It also includes software applications for demo, testing and evaluation.
© 2021 Microchip Technology Inc.
and its subsidiaries
User Guide DS50003166A-page 1
Probleemoplossing Microchip ATA8350
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | Microchip |
| Categorie: | Niet gecategoriseerd |
| Model: | ATA8350 |