Olympia
Bewakingscamera
WSL 10
Olympia WSL 10 Handleiding
Hier is de Olympia WSL 10 (Bewakingscamera) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 0.3 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
Installation
1 Close the window or French window and determine the assembly
position (see Figure 2).
2 Turn the latch (A) of the additional locking device (see Figure 3) and
remove the caps (C).
3 Position the mounting block (B) on the window frame(F). When
doing so, pay attention that there is 2 mm distance between the
window casement (D) and mounting block (B). The 2 mm spacer
plate (H) supplied can be used as an aid to determine the distance.
4 Mark the 4 drill holes for the retaining screws (E).
5 Then drill the holes using a drill bit with 3 mm Ø and screw the
mounting block (B) rmly to the window frame (F) using the self-tap -
ping screws (E).
6 To ensure that the latch (A) does not scrape over the window case-
ment when locking and unlocking, it may be necessary to use the
spacer plates (H) supplied to adjust the height.
7 Finally, press the 2 caps (C) back on the recesses in the retaining
screws (E).
Operation
1 To lock the window or French window, turn the latch (A) until it
engages.
2 To unlock it, press and hold the knob (G) in and turn the latch (A)
back again.
Figure 1: Overview, locked position
WSL 10 single-leaf Figure 2: Recommended
assembly position
Figure 3: Assembly of the
mounting block
Manufacturer Information:
Olympia Business Systems Vertriebs GmbH
Zum Kraftwerk 1 | 45527 Hattingen | Germany
Assembly Manual
WSL10
WSL20
Additional Window and French Window Lock
WSL 20 double-leaf
Probleemoplossing Olympia WSL 10
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | Olympia |
| Categorie: | Bewakingscamera |
| Model: | WSL 10 |