Philips
Haardroger
BHD727
Philips BHD727 Handleiding
Hier is de Philips BHD727 (Haardroger) gebruikershandleiding. 2 pagina's in taal met een gewicht van 1,436,720.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
1
2
English
Introduction
Congratulations on your purchase and welcome to Philips! To
fully benet from the support that Philips oers, register your
product at . www.philips.com/welcome
Important safety information
Read this important information carefully before you use the
appliance and save it for future reference.
Warning
-This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
BHD727
© 2024 Koninklijke Philips N.V.
保留所有权利
3000.130.8100.1 ( 02/07/2024 )
4
1
2
3
3
44 5
7
8
9 10 11
12
6
3
1 2
2
1
2
3
4
5 6
ڄ
ಣ࿖ߌ
ಣڄ
ٝಣ໑
1 ۱ᄅ
1x
؋οᄜӉο૰
ሱౢࢱ
ܱࠏ
4
1
5
ডӭ
ู֧
ࢌ
ߛ
֧
ড
֧
ӭ
֧
-When the appliance is used in a bathroom, unplug it after
use since the proximity of water presents a hazard, even
when the appliance is switched o.
-For additional protection, we advise you to install a residual
current device (RCD) in the electrical circuit that supplies the
bathroom. This RCD must have a rated residual operating
current not higher than 30mA. Ask your installer for advice.
-WARNING: Do not use this appliance near bathtubs,
showers, basins or other vessels containing water (Fig. 1).
-The supply cord cannot be replaced. If the supply cord is
damaged, you must have the appliance replaced by Philips,
a service center authorized by Philips or similarly qualied
persons in order to avoid a hazard.
-WARNING: Do not use this appliance near water.
-Always unplug the appliance after use.
-Do not pull on the supply cord after using. Always unplug
the appliance by holding the plug.
-Before you connect the appliance, ensure that the voltage
indicated on the appliance corresponds to the local power
voltage.
-Do not use the appliance for any other purpose than
described in the user manual.
-Do not use the appliance on articial hair.
-When the appliance is connected to the power, never leave
it unattended.
-Never use any accessories or parts from other
manufacturers or that Philips does not specically
recommend. If you use such accessories or parts, your
warranty becomes invalid.
-Do not wind the supply cord around the appliance.
-Wait until the appliance has cooled down before you
store it.
-Do not operate the appliance with wet hands.
-Always return the device to a service center authorized
by Philips for examination or repair. Repair by unqualied
people could cause an extremelyhazardous situation for
the user.
-Do not connect the appliance with a plug adapter. If really
necessary, only use a certied plug adapter.
-If the appliance overheats, it switches o automatically.
Unplug the appliance and let it cool down for a few
minutes. Before you switch the appliance on again, check
the grilles to make sure they are not blocked by u, hair,
etc.
-Do not insert metal objects into the air grilles to avoid
electric shock.
-Never block the air grilles.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards
and regulations regarding exposure to electromagnetic elds.
Recycling
-This symbol means that electrical products shall not be
disposed of with normal household waste (Fig. 2).
-Follow your country's rules for the separate collection of
electrical products.
Overview
1 Manual button
2 Power on/o & speed switch
3 Ring of the handle
4 Lock/Unlock mark
5 Foam
6 Removable air inlet grille cover
Dry you hair
When the dryer is plugged in without switching on, it will
automatically enter standby mode. The dryer’s handle might
have some warmth after a while, which is normal and safe to
use.
When the appliance is powered on, ions are automatically and
continuously dispensed, reducing frizz and providing additional
shine.
1 Connect the plug to a power supply socket.
2 or fast Slide the power on/o & speed switch to low
speed as desired.
3 Press the mode button to select your desired setting
according to the table as following:
Mode (Indicator) Function
Fast (Orange light) Dry shower-wet hair quickly
Ther moShield
(Yellow light)
Dry your hair at a constant caring
temperature
Cool (Blue light) Cool airow to cool down your hair
Hot/Cold
(Orange/Bl ue light)
Dry hair with an alternating hot and
cold airow for more comfortable
drying experience
-The hairdryer comes with memory feature, it can remember
the last used settings.
After use:
1 Switch o the appliance, unplug it and let it cool down.
2 Clean the appliance with a damp cloth.
3 It is suggested to use the auto-clean mode once a month,
-To activate the clean mode, you should turn o the hair
dryer rst.
-Short press the mode button and then press and hold it for
3 seconds.
-The auto-clean mode will run for 8 seconds. You can stop
auto cleaning by pressing the mode button.
4 Unlock the air inlet grille cover to remove hair and dust, and
use a toothbrush to gently clean the foam. Make sure to
put foam back after thorough cleaning.
Do not rinse the foam under tap water.
Troubleshooting
Problem Cause Solution
The appliance
does not work at
all. And/or false
ashing of white
light constantly.
The power
socket to which
the appliance
has been
connected may
be broken.
Check the appliance is
plugged in correctly.
Check the fuse for this
power socket in your
home.
The appliance
may have
overheated and
switched itself
o.
Unplug the appliance
and let it cool down for
a few minutes. Before
you switch on the
appliance again, check
the grilles to make sure
they are not blocked
by u, hair, etc.
Clean the air inlet
grille.
The appliance
may not be
suitable for the
voltage to which
it has been
connected.
Ensure that the voltage
indicated on the type
plate of the appliance
corresponds to the
local power voltage.
There is bad
smell for the
rst-time of use.
The smell may
come from the
new appliance.
The smell will gradually
disappear after a few
uses. Please try to dry
your hair in a well-
ventilated room.
There is burning
smell when
drying my hair.
If there is some
dust or residue
left in the
appliance, it
may be burnt
due to the high
temperature and
produce odor.
Turn o the appliance
and wait until it cools
down. Check if any
residues left.
Remove dirt from the
air inlet grille and keep
it clean regularly.
I hear annoying
noise when
using auto-clean
mode.
The motor
setting is
dierent under
auto-clean
mode.
Use auto-clean mode
once a month to avoid
blocking.
Support
For all product support such as frequently asked questions,
please visit .www.philips.com/support
100 % 循环再造纸
100 % recycled paper
Probleemoplossing Philips BHD727
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | Philips |
| Categorie: | Haardroger |
| Model: | BHD727 |