StarTech.com
Niet gecategoriseerd
BALBOARD
StarTech.com BALBOARD Handleiding
Hier is de StarTech.com BALBOARD (Niet gecategoriseerd) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 0.2 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
Quick-Start Guide
Manual Revision: 06/01/2018
Package Contents
• Balance Board x 1
• Rubber Feet x 4
• Screws x 4
• Washers x 4
• Quick-Start Guide x 1
Warning Statements
Read all warning statements before using the Balance Board.
• The Balance Board, by design, is unstable and may require frequent
user interaction to achieve a balanced stance; as a result, caution
should be exercised when mounting, dismounting and/or using the
Balance Board as personal injury and/or equipment damage can
result from a fall.
• While using the Balance Board, always wear appropriate footwear
(note: running shoes and other at soled shoes are recommended).
• Consult a physician before using the Balance Board.
• Use the Balance Board on a rm, at, dry, and level surface.
• The Balance Board can present a tripping hazard. Always store the
Balance Board in a location with no foot trac.
• Individuals under the age of 18 should be supervised by an adult when
using the Balance Board.
• The Balance Board has a maximum weight capacity of 300 pounds.
Requirements
• Phillips Head Screwdriver x 1
• A at, level surface for use
Installation
1. Align the four Rubber Feet with the predrilled holes.
2. Place one Washer over each of the four Screws.
3. Insert the four Screws (with the attached Washers) into the holes
in each of the Rubber Feet. (gure 1)
4. Fasten the four Screws in place using a Phillips Head Screwdriver.
Note: Do not overtighten the Screws.
Basic Operation
1. Place the Balance Board on a level surface. Or, drag the Balance
Board out from under your desk using the Foot Control Feature
(located along the rear edge of the Balance Board).
2. Find a location on your desk or other stable object where you can
rest your hand to stabilize your body, before attempting to stand
on the Balance Board.
3. Step onto the Balance Board, one foot at a time.
4. Slowly shift your weight towards the centre while engaging all of
your leg, back, and core muscles to facilitate a balanced stance.
SKU #: BALBOARD
Balance Board - for Standing Desk or Sit-Stand Workstation
Advanced Operation
To increase the balancing diculty, you can remove the Rubber
Feet. This will increase the degree of tilt in every direction.
Note: For your own safety, only attempt the Advanced Operation
after you have achieved proper balance during normal Operation.
1. Remove the Rubber Feet using a Phillips Head Screwdriver.
2. Repeat steps 1-5 from the Basic Operation section.
Product Diagram
Bottom View
For the latest information, specications, and support visit www.startech.com/BALBOARD.
Screws
Washers
Rubber
Feet
Spherical
Base
Foot Control
Feature
gure 1
Probleemoplossing StarTech.com BALBOARD
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Grijs |
| Gewicht: | 2000 g |
| Breedte: | 350 mm |
| Diepte: | 500 mm |
| Hoogte: | 62 mm |
| Gewicht verpakking: | 3000 g |
| Breedte verpakking: | 355 mm |
| Diepte verpakking: | 510 mm |
| Hoogte verpakking: | 65 mm |
| Snelstartgids: | Ja |
| Maximale gewichtscapaciteit: | 136 kg |
| Certificering: | RoHS, CE, REACH |
| Materiaal: | Kunststof |
| Inclusief schroeven: | Ja |
| Rubberen voetjes: | Ja |
| Bereik kantelhoek: | 4.5 - 9.4 ° |
| Inbegrepen sluitringen aantal: | 4 |