StarTech.com
Niet gecategoriseerd
PEXUS313AC2V
StarTech.com PEXUS313AC2V Handleiding
Hier is de StarTech.com PEXUS313AC2V (Niet gecategoriseerd) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 487,648.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
Instruction manual
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
JP: - jp.startech.com取扱説明書
Manual Revision: 02/12/2018
For the latest information, technical specications, and support for
this product, please visit www.startech.com/PEXUS313AC2V.
Package contents
• 1 x controller card
• 1 x instruction manual
System requirements
• Computer with an available PCI Express slot (x4, x8, x16)
• Any of the following operating systems:
• Windows® 10 (32-bit or 64-bit)
• Windows 8 / 8.1 (32-bit or 64-bit)
• Windows 7 (32-bit or 64-bit)
• macOS 10.13
• 15-pin SATA power connector (optional)
or
• LP4 molex power connector (optional)
Operating system requirements are subject to change. For the latest
requirements, please visit www.startech.com/PEXUS313AC2V.
PEXUS313AC2V
4-Port PCI Express USB 3.1 (10Gbps) Controller Card - 3x USB-A - 1x USB-C
*actual product may vary from photos
Product diagram
Installation
Install the USB 3.1 card
WARNING!
PCI Express cards can be severely damaged by static electricity. Make
sure that you’re properly grounded before you handle any and all
electronic components. You should wear an anti-static strap when you
install any computer component. If an anti-static strap isn’t available,
discharge any built-up static electricity by touching a large grounded
metal surface for several seconds. Only handle the PCI Express card by
its edges and don’t touch the gold connectors.
1. Turn o your computer and any devices or peripherals that are
connected to it (for example, printers, external hard drives, etc).
2. Unplug the power cable from the back of your computer.
3. Disconnect any peripheral devices that are connected to your
computer.
4. Remove the cover from your computer case. Consult the
documentation that came with your computer for details about
how to do this properly.
5. Locate an open PCI Express slot (x4 or higher) and remove the
corresponding metal cover plate from the back of your computer
case. Consult the documentation that came with your computer
for details about how to do this safely.
6. Gently insert the card’s PCIe connector into the open PCI Express
slot and fasten the bracket to the back of the case.
7. (Optional): Connect either a 15-pin SATA or LP4 power connector
from your computer’s power supply to the card’s SATA or LP4
power connector.
Note: it is recommended that you connect SATA or LP4 power
to ensure sucient power is provided to the card and to each
USB 3.1 port.
8. Place the cover back onto your computer case.
9. Reconnect the power cable to the back of your computer.
10. Reconnect all of the peripheral devices that you disconnected in
step 3.
11. Turn on your computer.
About USB 3.1 Gen 2
USB 3.1 Gen 2 oers speeds up to 10Gbps. The PEXUS313AC2V is a
USB 3.1 (10Gbps) Gen 2 card.
3 x USB 3.1 port
(USB-A)
USB 3.1 port
(USB-C™)
PCIe p1-x4
connector
SATA power
connector
LP4 Molex
connector
Probleemoplossing StarTech.com PEXUS313AC2V
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Gewicht: | 81 g |
| Breedte: | 85 mm |
| Diepte: | 126 mm |
| Hoogte: | 20 mm |
| Gewicht verpakking: | 134 g |
| Breedte verpakking: | 142 mm |
| Diepte verpakking: | 170 mm |
| Hoogte verpakking: | 30 mm |
| Gebruikershandleiding: | Ja |
| Certificering: | CE, FCC |
| Duurzaamheidscertificaten: | RoHS |
| Temperatuur bij opslag: | -10 - 70 °C |
| Intern: | Ja |
| Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type C: | 1 |
| Ondersteunt Mac-besturingssysteem: | Mac OS X 10.10 Yosemite, Mac OS X 10.9 Mavericks |
| Ondersteunt Linux: | Ja |
| Hostinterface: | PCIe |
| Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type A: | 3 |
| Ondersteunde server operating systems: | Windows Server 2008 R2, Windows Server 2012 R2, Windows Server 2016 |
| Chipset: | ASMedia - ASM1142, Pericom PI7C9X2G308GP |
| Bedrijfstemperatuur (T-T): | 0 - 60 °C |
| Relatieve vochtigheid in bedrijf (V-V): | 5 - 90 procent |
| Code geharmoniseerd systeem (HS): | 84733020 |
| Uitbreidingskaartstandaard: | PCIe 2.0 |
| Data transfer snelheid (max): | 10 Gbit/s |
| Aantal Internal SATA ports: | 1 |
| Peripheral (Molex) power connectors (4-pin): | 1 |
| Output interface: | USB 3.2 Gen 1 (3.1 Gen 1) |
| UASP-ondersteuning: | Ja |