StarTech.com
schede di rete e adattatori
PEXUSB3S3GE
StarTech.com PEXUSB3S3GE Handleiding
Hier is de StarTech.com PEXUSB3S3GE (schede di rete e adattatori) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 0.4 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
I T: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
P T: Guia do usuário - pt.startech.com
Manual Revision: 01/30/2015
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x 3 Port PCI Express USB 3.0 Card w/ Gigabit Ethernet
• 1x Low-Prole Bracket
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• PCI Express enabled computer with an available PCI Express p1-x1 slot
or higher (x4, x8, x16)
• SATA power connector (highly recommended, but optional)
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64),
Windows Server® 2012, 2008 R2, Linux 2.6.31 and up (Tested up to
3.5)
PEXUSB3S3GE
3 port PCI Express USB 3.0 card with Gigabit Ethernet - SATA power
Installation
Hardware Installation
WARNING!
PCI Express cards, like all computer equipment, can be severely
damaged by static electricity. Be sure that you are properly
grounded before opening your computer case or touching your PCI
Express card. StarTech.com recommends that you wear an anti-
static strap when installing any computer component. If an anti-
static strap is unavailable, discharge yourself of any static electricity
build-up by touching a large grounded metal surface (such as the
computer case) for several seconds. Also be careful to handle the PCI
Express card by its edges and not the gold connectors.
1. Turn your computer o and any peripherals connected to the
computer (i.e. printers, external hard drives, etc.). Unplug the
power cable from the rear of the power supply on the back of the
computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. (See your computer
system documentation for details).
3. Locate an open PCI Express p1-x1 slot and remove the metal cover
plate on the rear of the computer case. (See your computer
system documentation for details).
Note: This card will work in PCI Express slots of additional lanes (i.e.
x4, x8, or x16 slots).
4. Gently insert the card into the open PCI Express slot and fasten
the bracket to the rear of the computer case.
Note: If installing the card into a small form-factor/low-prole
desktop system, replacing the pre-installed standard-prole bracket
with the included low-prole (half-height) installation bracket may
be necessary.
5. It is recommended you connect the optional SATA power using
an available SATA power connector from the computers power
supply.
Note: It is recommended that SATA power is connected to the card
to ensure sucient power is provided to each USB 3.0 port.
6. Place the cover back onto the computer case.
7. Insert the power cable into the socket on the power supply of the
computer, and reconnect all other connectors removed in Step 1.
Gigabit
RJ 45 Port
SATA
Power
PCI Express x1
USB 3.0 Ports
Type “A”
Female x 3
Probleemoplossing StarTech.com PEXUSB3S3GE
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Larghezza: | 18 mm |
| Profondità: | 77 mm |
| Altezza: | 120 mm |
| Peso: | 60 g |
| Full duplex: | Sì |
| Chipset: | Renesas / NEC - µPD720201, Realtek - RTL8153 |
| Auto MDIX IEEE: | Sì |
| Certificati di sostenibilità: | RoHS |
| Colore del prodotto: | Metallic, Red |
| Collegamento ethernet LAN: | Sì |
| Velocità trasferimento Ethernet LAN: | 10,100,1000 Mbit/s |
| Quantità porte Ethernet LAN (RJ-45): | 1 |
| Certificazione: | CE, FCC |
| Velocità massima di trasferimento dati: | 5000 Mbit/s |
| Standard di rete: | IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x |
| Interno: | Sì |
| Indicatori LED: | Activity, Link |
| Range di umidità di funzionamento: | 20 - 80 % |
| Intervallo temperatura di funzionamento: | 5 - 50 °C |
| Intervallo di temperatura: | -25 - 70 °C |
| Peso dell'imballo: | 150 g |
| Tecnologia di cablaggio: | 10/100/1000BaseT(X) |
| Tecnologia di connessione: | Cablato |
| Wake-on-LAN ready: | Sì |
| Sistemi operativi server supportati: | Windows Server 2008 R2, Windows Server 2012 |
| Larghezza imballo: | 144 mm |
| Profondità imballo: | 176 mm |
| Altezza imballo: | 33 mm |
| Interfaccia host: | PCI Express |
| Interfaccia: | Ethernet |
| versione PCI: | 2.0 |
| Fattore di forma della Scheda PCI: | Altezza intera (profilo basso) |
| Versione USB: | 3.2 Gen 1 (3.1 Gen 1) |
| Quantità di porte hub USB Tipo-A 3.2 Gen 1 (3.1 Gen 1): | 3 |
| Tempo medio tra guasti (MTBF): | 1920042 h |
| Supporto Jumbo Frames: | Sì |
| VLAN tagging: | Sì |
| Auto-negoziazione: | Sì |
| Frame Jumbo: | 9000 |
| Supporto controllo flusso: | Sì |
| Velocità di trasferimento dati USB: | 5000 Mbit/s |
| Supporto UASP: | Sì |
| Sistema operativo Linux supportato: | Sì |
| Quantità: | 1 |
| Drivers inclusi: | Sì |
| Manuale dell'utente: | Sì |
| Staffe di montaggio incluse: | Sì |
| Codice del Sistema Armonizzato (SA): | 85176990 |