Taylor Niet gecategoriseerd 5315856

Taylor 5315856 Handleiding

Hier is de Taylor 5315856 (Niet gecategoriseerd) gebruikershandleiding. 3 pagina's in taal met een gewicht van 343,461.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.

Pagina 1/3

5315856

11lb Digital Light Energy Scale

Thank you for purchasing a Taylor® digital kitchen scale. Your Taylor® scale is an example of

superior design and craftsmanship. Please read this instruction manual carefully before use.

Keep these instructions handy for future reference.

Power Information

This scale operates on light energy. An eco-friendly, battery-free solution to your cooking needs.

Its innovative design harnesses both natural (sun) light and artificial light (light bulbs), providing

consistent performance while reducing waste and energy consumption.

Activating the Power Panel

1. Once the scale is exposed to a light source a blinking SUN icon will show on the display.

NOTE: There is no battery backup so the scale must have a light source for use.

2. The scale charges fully with only 90 seconds of light. Press the “ ” button to turn on the scale

and again to power off the scale after use.

General Weighing Operation

1. Place the scale on a hard, level surface.

2. Press the “ ” button to turn the scale on. The display will turn on and show zero when it is

ready for use. If the display does not show zero, press the “tare” button. The scale will reset

(tare) to zero.

3. Your scale weighs in pounds/ounces (lb oz), grams (g), fluid ounces (fl oz) and milliliters (mL).

Press the UNIT button on the top of the scale to change the units of measurement.

4. Place the item to be weighed on the center of the platform. The weight will display. As you

add weight, the weight displayed increases.

5. The scale will turn off automatically within 2 minutes of non-use or if there is no change in

weight. To turn the scale off manually, press and hold the “ ” button until the scale turns off.

Tare Operation

You may wish to weigh ingredients in a bowl or other container (not included). In this case, you

will need to tare, or offset, the weight of the bowl so that only the weight of the ingredients is

displayed.

1. Choose a container that will safely balance on the platform without tipping or falling. Do not

use a heavy container, as this might reduce the maximum capacity of the scale.

2. While the scale is off, place the empty container on the scale platform. Turn the scale on. The

display will turn on and then show zero. The weight of the container has been zeroed out.

3. Add the ingredient to be weighed. The weight of the ingredient alone will display.

COFFEE HUSK BLEND

IN AN EFFORT TO BE KINDER TO THE PLANET, THIS

SCALE IS PRODUCED WITH 10% RECYCLED COFFEE

HUSKS KEEPING THEM OUT OF LANDFILLS. THE –

APPEARANCE OF THE SCALE WILL BE VARIED.

Probleemoplossing Taylor 5315856

Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp