Tor Rey
Weegschaal
SR-50/100
Tor Rey SR-50/100 Handleiding
Hier is de Tor Rey SR-50/100 (Weegschaal) gebruikershandleiding. 1 pagina's in taal Engels met een gewicht van 0.1 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/1
TOR REY ELECTRONICS
CALIBRATION PROCEDURE FOR SR-50/100
1. PUT THE SCALE IN A PLACE FREE OF ANY MOVEMENT OR VIBRATION.
2. MAKE SURE THAT THE SCALE IS LEVELED AND WELL SUPPORTED ON ITS
FOUR BASES; CONNECT THE SCALE TO A 120 VAC OUTLET.
3. TURN THE SCALE ON AND DURING THE COUNTDOWN PRESS THE PUSH
BUTTON LOCATED BEHIND THE SILVER COVER ON THE BACK OF THE
SCALE.
4. THE INDICATOR SHOULD READ . NOW ENTER THE CALIBRATION “CODE”
PASSWORD
TARE
ZERO
ZERO
T ARE
ZERO
TARE
, AND PRESS
THE . KEY
5. RZERO THE SCALE WILL READ “ ”. NOW WITH NOTHING ON THE SCALE
PRESSE THE KEY. THE SCALE WILL DO A COUNTDOWN FROM 5
AND THAT IS YOUR REFERENCE TO ZERO.
6. 50 LBS ON THE SCALE NEXT THE SCALE WILL READ “LOAD”. NOW PLACE
AND PRESS THE KEY. THE SCALE WILL DO A COUNTDOWN
FROM 5.
7. WAIT A MOMENT. DO NOT REMOVE THE WEIGHT FROM THE SCALE
UNTIL A NUMBER APPEARS IN THE INDICATOR.
8. REMOVE THE WEIGHT FROM THE PLATE AND TURN THE SCALE NOW
OFF. IN THIS MOMENT THE SCALE HAS BEEN CALIBRATED.
9. VERIFY THE ACCURACY IN THE WEIGHT AND REPEAT THIS
PROCEDURE IF NEEDED.
Probleemoplossing Tor Rey SR-50/100
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | Tor Rey |
| Categorie: | Weegschaal |
| Model: | SR-50/100 |