Crestron
AV extender
DM-TX-4K-202-C
Crestron DM-TX-4K-202-C Handleiding
Hier is de Crestron DM-TX-4K-202-C (AV extender) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 0.6 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
DO GUIDE
DO Connect the Device
Connect the device as required for the application.
Connections, Left Side (DM-TX-4K-302-C Shown)
Connections, Right Side
NOTE: The DM OUT port of the DM-TX-4K-302-C is a PoDM+ powered device (PD) port and is also
compatible with HDBaseT® PoE+. The DM OUT port of the DM-TX-4K-202-C is a standard PoDM
PD port and is also compatible with HDBaseT PoE. In order for the device to receive PoDM+ or
PoDM, the device requires connection to a DigitalMedia™ switcher or other equipment that has a
corresponding PoDM+ or PoDM power sourcing equipment (PSE) port. In order for the device to
receive HDBaseT PoE+ or HDBaseT PoE, the device requires connection to equipment that has a
corresponding HDBaseT PoE+ or HDBaseT PoE PSE port. Any wiring that is connected to a PoDM+,
PoDM, HDBaseT PoE+, or HDBaseT PoE PSE port is for intrabuilding use only and should not be
connected to a line that runs outside of the building in which the PSE is located.
Connection to the included power pack is not required when PoDM+, PoDM, HDBaseT PoE+, or
HDBaseT PoE is used to power the device.
NOTE: The DM-TX-4K-302-C requires PoDM+, HDBaseT PoE+, or the included power pack to power
a USB device that connects to the USB HID port. PoDM, HDBaseT PoE, or the included power pack
can be used to power the DM-TX-4K-302-C if no USB device connects to the USB HID port.
DM-TX-4K-202-C/DM-TX-4K-302-C
4K DigitalMedia 8G+® Transmitters
DO Install the Device
The Crestron® DM-TX-4K-202-C and DM-TX-4K-302-C can be mounted onto a at surface or onto a
rack rail.
Mounting onto a Flat Surface
Using four mounting screws (not included), mount the device onto a at surface such as a wall or a
ceiling.
Mounting onto a Wall
Mounting onto a Rack Rail
The DM-TX-4K-202-C and DM-TX-4K-302-C mount onto the front or rear rail of a rack. Position either
the left or the right mounting ange of the device so that the holes align with the holes in the rack.
Then, secure the device to the rack using two rack mounting screws (not included).
Mounting onto a Rack Rail
DO Check the Box
QTY PRODUCT PART NUM.
1 Connector, 2-Pin 2003574
1 Connector, 5-Pin 2003577
1 Power Pack, 24 Vdc 0.75 A, 100-240 Vac 2045865
HDMI IN 1–2:
From HDMI®
audio/video
sources
AUDIO IN:
From unbalanced
stereo line level
audio source*
DM OUT:
To DM® switcher,
receiver, or other
DM device or to
HDBaseT® device
VGA IN:
From RGB (VGA),
component, S-video,
or composite
video source*
24 V
0.75A:
From included
power pack
Ground
*VGA IN and AUDIO IN are available on the DM-TX-4K-302-C only.
COMPUTER:
To computer
or other USB
HID compliant
host
HDMI OUT:
To HDMI
display
IR:
To IR
controllable
device
LAN:
10BASE-T/
100BASE-TX
Ethernet to
local network
device
COM:
To
RS-232
device
USB HID:
To mouse/
keyboard or
other USB HID
compliant device
Probleemoplossing Crestron DM-TX-4K-202-C
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Gewicht: | 647 g |
| Breedte: | 135 mm |
| Diepte: | 28 mm |
| Hoogte: | 280 mm |
| Soort: | AV-zender |
| LED-indicatoren: | Ja |
| USB-connectortype: | USB Type-A, USB Type-B |
| Connectiviteitstechnologie: | Bedraad |
| Ethernet LAN: | Ja |
| Ondersteunde video-modi: | 1080p, 2160p |
| Maximum resolutie: | 4096 x 2160 Pixels |
| Aantal USB-aansluitingen: | 2 |
| HDCP: | Ja |
| Aansluiting voor netstroomadapter: | Ja |
| Materiaal: | Metaal |
| Ondersteunde grafische resoluties: | 1600 x 1200 (UXGA),1920 x 1080 (HD 1080),1920 x 1200 (WUXGA),2048 x 1080,2560 x 1440,2560 x 1600 (WQXGA),3840 x 2160,4096 x 2160 |
| Netwerkstandaard: | IEEE 802.3at |
| Output current: | 0.75 A |
| HDMI in: | 2 |
| Aantal HDMI-uitgangen: | 1 |
| RJ-45 invoer ports: | 1 |
| Operating voltage: | 24 V |
| HDBaseT-poort: | Ja |
| Maximaal bereik: | 100 m |
| AC-ingangsspanning: | 100-240 V |
| AC-ingangsfrequentie: | 50 - 60 Hz |
| Bedrijfstemperatuur (T-T): | 0 - 40 °C |
| Relatieve vochtigheid in bedrijf (V-V): | 10 - 90 procent |
| HDCP- & EDID-omzeiling: | Ja |