Crestron
Niet gecategoriseerd
FT-TS600-B
Crestron FT-TS600-B Handleiding
Hier is de Crestron FT-TS600-B (Niet gecategoriseerd) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 0.5 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
DO GUIDE
FT-TS600
FlipTop™ Touch Screen
DO Install the Device
Installing the Bushings
The Crestron® FT-TS600 ships with two cable management
plates preinstalled. These provide a pullout cable solution for
the AUD OUT (audio output), COMPUTER, and LAN cables. A
6 foot (1.8 meter) USB type A to type B cable is included for
the COMPUTER connection. Cables are looped through the
cable management plates.
The included bushings must be installed before mounting the
FT-TS600 into a surface. For a neat appearance, any unused
openings can be lled using the included hole plugs. The only
tool required to install the bushings is a Phillips screwdriver.
1. Remove the two cable management plates and retain the
two 06-32 x 1/4” screws.
2. Place the bushings on the cables (eight bushings
supplied).
3. Thread the cables through the appropriate slots in each
cable management plate.
4. Snap the bushings into the cable management plate
slots.
5. Feed all excess cable through the bushings.
6. Attach each cable management plate by sliding the
dovetail into the slot shown below, dropping the front
of the cable management plate into place, and then
securing the cable management plate with the
06-32 x 1/4” screw from step 1.
Mounting into a Surface
The FT-TS600 is designed
to mount into a horizontal
sur face, such as a desktop,
lectern, or podium. The
following diagram illustrates
the required cutout dimensions
to accommodate the
FT-TS600.
NOTE: Before inserting the FT-TS600 into the mounting hole,
ensure that all require cables have been installed.
The only tools required are a Phillips screwdriver and a #10
Allen wrench. To mount the FT-TS600, use the following
procedure:
1. Position the FT-TS600 in the mounting hole.
2. Install the four included 10-32 x 2” socket screws in the
metal mounting plates (two screws per plate).
3. Slide the moutning plates over the studs on each side of
the FT-TS600.
4. Turn the four 10-32 x 2” socket screws equally until they
contact the underside of the mounting surface.
NOTE: Do not overtighten the screws because this may
damage the surface or the unit.
DO Check the Box
QTY PRODUCT PART NUM.
2 Mounting Plates 2036985
4 Screws, 10-32 x 2", Socket 2037109
4 Small Hole Plugs 2036647
4 Large Hole Plugs 2036649
4 Small Bushings 2009522
4 Large Bushings 2010496
1 Connector, 3-Pin 2003575
1 Cable, USB 2.0, A-B, 6' (1.8 m) 2014966
1 Cutout Template 4519221
Cable Management Plates (2)
Bushing
Screws (2) 06-32 x 1/4”
The cable management
plate dovetail inserts here.
Maximum
Radius
1/8”
(4 mm)
6 1/4”
(159 mm)
7 1/2”
(190 mm)
Screws (4) #10-32 x 2”
Mounting Surface
Mounting Plates
Surface Cutout
Studs for the
Mounting Plate
Probleemoplossing Crestron FT-TS600-B
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Gewicht: | 2400 g |
| Breedte: | 203 mm |
| Diepte: | 172 mm |
| Hoogte: | 218 mm |
| Materiaal behuizing: | Aluminium, Metal |
| Beeldschermdiagonaal: | 5 " |
| Resolutie: | 800 x 480 Pixels |
| RAM-capaciteit: | 1024 MB |
| Ethernet LAN: | Ja |
| Montagewijze: | In-muur |
| Kijkhoek, horizontaal: | 69 ° |
| Kijkhoek, verticaal: | 64 ° |
| Helderheid: | 300 cd/m² |
| Ingebouwde luidsprekers: | Nee |
| Intern geheugen: | 4000 MB |
| Beeldverhouding: | 15:9 |
| Kleurdiepte: | 24 Bit |
| Ethernet LAN, data-overdrachtsnelheden: | 10, 100 Mbit/s |
| Backlight type: | LED |
| RJ-45 ports hoeveelheid: | 1 |
| Touchscreen technologie: | Projected capacitive-systeem |
| Contrastverhouding: | 450:1 |
| Wifi: | Nee |
| Bedrijfstemperatuur (T-T): | 0 - 45 °C |
| Relatieve vochtigheid in bedrijf (V-V): | 10 - 90 procent |
| Type beeldscherm: | TFT |