EBERLE
                        
                        Niet gecategoriseerd
                        
                        TS Slimline
                    
                    EBERLE TS Slimline Handleiding
Hier is de EBERLE TS Slimline (Niet gecategoriseerd) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 619,134.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
                                Pagina 1/2
                            
                            
                            
Montage
Der thermische Stellantrieb wird mit der Überwurfmutter 
auf das Ventil oder den Verteiler aufgeschraubt.
Hinweis:
Die  Einbaulage  ist  senkrecht  nach  oben  oder 
waag recht.  Der  Stellantrieb  darf  nicht  nach  unten 
hängend montiert werden! Überwurfmutter nur von 
Hand festziehen.
(senkrechte Einbaulage)
Achtung !
Das Gerät darf nur durch einen Elektro-Fachmann in-
stalliert werden. Dabei sind die bestehenden Sicher-
heitsvorschriften zu beachten! Der thermische Stell-
antrieb TS Slimline dient zur Steuerung von Ventilen 
in üblicher Umgebung. 
Relevante Vorschriften:
2004/108/EC-    Elektromagnetische Verträglichkeit
2006/95/EC -    Niederspannungsrichtlinie (LVD)
2011/65/EU -    Beschraenkung der Verwendung be-
stimmter gefaehrlicher Stoffe (RoHS)
EN60730-1:   Automatische elektrische Regel- und 
Steuergeräte für den Haus gebrauch 
und ähnliche Anwendungen
EN60529:1992-    Schutzarten durch Gehaeuse
Montage- und Einstellanleitung
Thermische Stellantriebe  
stromlos geschlossen 
 TS Slimline
U 468 931 004 142-3
D
Anwendung und Funktion
Die  thermischen  Stellantriebe  stromlos  geschlos-
sen  TS  Slimline  decken  vielfältige  Steuerungs-  und 
 Regelaufgaben  in  der  Heizungs-,  Klima-  und  Lüftungs-
technik ab. Typische Anwendungsgebiete sind unter an-
derem;
•  Einzelraumregelung von Fußbodenheizungs- und Heiz-
körperanlagen
•  Gruppenregelung
•  Mehrkreisregelung bei Ein- und Zweirohranlagen
•  Einzelraumregelung von Einrohrheizungen in reitender 
Ausführung
Der Stellantrieb kann für verschiedene Ventiltypen gelie-
fert werden. Er wird von einem Regelgerät (z.B. Raumtem-
peraturregler)  angesteuert.  Ein  Anzeigefenster  zeigt  an, 
wie weit der Stellantrieb geöffnet ist.
88.4
39.0
54.0
Technische Daten
Typabhängig gilt:
24 V-Version
Stromversorgung 24 V AC/DC
Stromaufnahme (max.) ~ 400 mA
Leistungsaufnahme 2,5 W
 230 V-Version
Stromversorgung 230 V~ 50 Hz
Stromaufnahme (max.) ~ 400 mA
Leistungsaufnahme 2,5 W
Für beide Typen gilt:
Schutzart  IP 54 bei senkrechter 
Montage (siehe Montage)
Schutzklasse II
Hub 3,5 mm
Federkraft 90 N
Ventil-Anschlussmaß M 30 x 1,5
Kabel 2 x 0,5 mm
2
Gewicht ~150 g
Betriebstemperatur 0… 50 °C
Lagertemperatur –25 … 70 °C
Temperatur fuer die  
Kugeldruckpruefung
86 ⁰C
Bemessungsstossspannung 2.5KV
Verschmutzungsgrad 2
Elektrischer Anschlus
Achtung !
Vor dem elektrischen Anschluss Steuergerät 
 spannungsfrei schalten
Alle Typen werden mit Kabel geliefert. Beim elektrischen 
Anschluss die Nennspannung der Geräte beachten:
TS Slimline: 230 V~, 50 Hz
TS Slimline: 24 V~ AC/DC
Bedienung
Die Hubanzeige hinter dem Schauglas an der Frontsei-
te des  Stellantriebes zeigt an,  wie weit der  Stellantrieb 
geöffnet ist. Die Hubanzeige dient damit der Funktions-
überwachung des Stellantriebes: läuft die Anzeige nach 5 
Minuten anliegender Betriebsspannung auf die Position 
„geöffnet“, so arbeitet das Gerät einwandfrei. Trennt man 
den Stellantrieb von der Spannung, muss die Hubanzei-
ge innerhalb von 5 Minuten die Position „geschlossen“ 
anzeigen.
Lieferprogramm
Typ Betriebs-
spannung
Funktion
TS Slimline AC 230 V stromlos geschlossen
TS Slimline stromlos geschlossenAC/DC 24 V
Mounting and  
operating instructions
Thermal actuators  
normally closed (NC)  
type TS Slimline
U 468 931 004 142-3
Application and function
The  thermal  actuators  can  solve  various  tasks  of  con-
trolling  and  regulating  in  the  applications  heating, 
air-conditioning and ventilation.
Typical areas of application are:
•  single room control for under floor heating systems and 
radiator heating systems
• zone control
• multi-circuit control with 1- or 2-pipe systems
•  single room control of 1-pipe heating systems in riding 
versions
The  thermal  actuator  can  be  supplied  for  various  valve 
types and sizes of mechanical connections. It is controlled 
by a control device (e.g. room thermostat)
88.4
39.0
54.0
Technical Data
Depending on the type the following applies:
24 V-Version
Power supply 24 V AC/DC
Operating current (max.)  ~ 400 mA
Power consumption 2.5 W
 230 V-Version
Power supply 230 V~ 50 Hz
Operating current (max.)  ~ 400 mA
Power consumption 2.5 W
The following applies to all types:
Protection type IP 54 at vertical installation 
(see installation)
Protection class II
Stroke 3,5 mm
Spring tension 90 N
Mechanical connections M 30 x 1,5
Wire 2 x 0.5 mm
2
Weight  ~150 g
Operating temperature 0 … 50 °C
Storage temperature –25 … 70 °C
Ball pressure temperature 86 ⁰C
Rated impulse voltage 2.5 KV
Pollution degree 2
Installation
The thermal actuator is screwed on to the valve or mani-
fold with a ring nut.
Note:
The device can be installed vertically or horizontal-
ly. The thermal actuator may not be installed upside 
down. Ring nut to be hand tightened!
(vertical installation)
Warning !
The TS Slimline should only be installed by a suitably 
 -qualified  person.  All  valid  health  and  safety  regu-
lations  must  also  be  complied  with.  The  Thermal 
Actuator TS Slimline is suitable for the opening and 
closing of valves in dry and enclosed rooms in normal 
ambient conditions. 
Applicable Standards:
2004/108/EC-   Electromagnetic compatibility 
2006/95/EC -   Low Voltage Directive
2011/65/EU -    Restriction of the use of certain  
Hazardous Substances (RoHS)
EN60730-1:   Automatic electrical controls for 
household and similar use
EN60529:1992-    Degree of protection provided by 
enclosures 
Electrical connection
Warning !
Disconnect from mains before installing
All versions are supplied with a cable. When connecting 
pay attention to rated voltage of the device.
TS Slimline: 230 V~, 50 Hz
TS Slimline: 24 V~ AC/DC
Operation
The stroke display window situated on the front of the 
 actuator  shows  how  far  the  actuator  is  opened.  The 
stroke display shows if the actuator is running well.
If voltage is applied to the device for 5 Min., the indicator 
should show an open valve.
If  disconnecting  the  voltage  for  5  Min.,  the  indicator 
should show a closed valve.
Programs
Type Power  
supply
Function
TS Slimline AC 230 V NC
TS Slimline AC/DC 24 V NC
*
  Dieses  Produkt darf  nicht über  den Hausmüll 
entsorgt  werden.  Bitte  nur  in  speziellen  Ein-
richtungen für Elektronikschrott entsorgen. Er-
kundigen Sie sich bei den örtlichen Behörden 
zur Recycling Beratung.
*
  This  product  should not  be  disposed  of  with 
household waste. Please recycle the products 
where facilities for electronic waste exist. Check 
with your local authorities for recycling advice.
Probleemoplossing EBERLE TS Slimline
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | EBERLE | 
| Categorie: | Niet gecategoriseerd | 
| Model: | TS Slimline |