Kenwood KRK-10 Handleiding
Hier is de Kenwood KRK-10 (Radio) gebruikershandleiding. 25 pagina's in taal Nederlands met een gewicht van 2.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/25
CABLE
INSTRUCTION MANUAL
PRECAUTIONS
• The following product is exclusively for use with transceivers.KENWOOD
• To prevent possible accidents and damages, do not attempt to use this product with
other types of transceivers.
ABOUT PRODUCT
USB PROGRAMMING INTERFACE CABLE
• This product is the cable to connect transceivers and the PC.KENWOOD
• Install the UART driver or USB driver from the supplied CD to the PC.
PROGRAMMING INTERFACE CABLE
• This product is the cable to connect transceivers and the PC.KENWOOD
FILTERED CIGARETTE LIGHTER CORD
• The cigarette lighter cable allows you to supply power to your transceiver
from the cigarette lighter of your automobile.
• The cigarette lighter cable is equipped with a 2 A fuse. When the fuse
blows, replace it with a fuse of the same rating.
To cigarette
lighter socket To transceiver
3.4 mm
Fuse (2A)
CAUTION:
●12 V DC ONLY
Serious damage may result to your transceiver if this cable is connected to a voltage
source greater than 16 V. Some vehicles have battery voltages of 24 V or greater.
REMOTE CONTROL KIT
• These products are the connection cable kits for installing the operation
panel of KENWOOD mobile transceivers separately.
B5A-1082-00
© 2015
Probleemoplossing Kenwood KRK-10
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Merkcompatibiliteit: | Kenwood |
| Lengte: | 7000 mm |
| Aantal: | 1 |
| Compatibiliteit: | NX-700E, NX-800E, TK-7180E, TK-7189E, TK-8180E, TK-8189E |