Microchip
Niet gecategoriseerd
IS1870
Microchip IS1870 Handleiding
Hier is de Microchip IS1870 (Niet gecategoriseerd) gebruikershandleiding. 3 pagina's in taal Engels met een gewicht van 0.8 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/3
BM70/71 & IS1870/71 rmware 2.03 Release Notes Fi – July 22, 20 20
IS1870/71 & BM70/71 Firmware 2.03
Release Notes
1 Overview
Firmware version 2.0 is a maintenance release for IS1870, IS1871, BM70, and BM71. Firmware
version 2.0 adds new features/ removes limitations in previous release 1.11. This firmware is made
available on Microchip’s web site for existing IC’s and modules.
1.1 Resolved Issues
• Fixed read ADC command problem for temperature detection.
• Fixed Sweyntooth BLE vulnerabilities in LL, SMP and L2CAP layers.
• Fixed disconnection issue with Xiaomi Mi 10 Pro Phone.
• Fixed MPAF OTA update UI fail issue.
• Fixed HID over GATT issue.
• Fixed an issue where pairing fails in Multilink scenario with reason DHKey failure check.
• Fixed Instant Pass Issue for Multilink scenarios (LL_STATUS_ERROR_INSTANT_PASSED/0x28)
• IOP Pairing fail issue with Samsung S8 Verizon variant.
• Write to Flash is enabled for few manual pattern commands like WRITE DEVICE NAME
command (0x08).
• Fixed issue where AutoPattern Mode BM70 outputs manual mode data from UART.
• Fixed an issue where the application always starts passive scan irrespective of whether scan
type is set to passive or active.
• Fixed an issue where the SCAN_RES is displayed as ADV_IND.
• Fixed an issue where ADC return value was shown incorrectly.
• Fixed an issue where connection was getting terminated due to MIC failure in Multilink scenario.
1.2 New Features
• BLE Data Length Extension to max 251 bytes.
• Maximum BLE ATT MTU size is 247 bytes
• AFH channel map adjust automatically when BLEDK3 is Central role ed
• Supports LE privacy feature v1.1 (disabled by default in UI settings)
• Enhance data transmission throughput in Auto pattern mode
• Supports following in auto pattern mode
o BLEDK3 v2.0 to be GAP Central role
o It allows two nearby BLEDK3 v2.0 devices with auto pattern to establish BLE link
Probleemoplossing Microchip IS1870
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | Microchip |
| Categorie: | Niet gecategoriseerd |
| Model: | IS1870 |