Mikrotik
Powerline adapter
PWR-LINE US
Mikrotik PWR-LINE US Handleiding
Hier is de Mikrotik PWR-LINE US (Powerline adapter) gebruikershandleiding. 4 pagina's in taal Engels met een gewicht van 0.6 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/4
PWR-LINE
The PWR-LINE series devices allow Ethernet like connectivity between supported devices over regular electrical
power lines. When plugged into the same electrical circuit, the PWR devices will establish Ethernet connectivity by
using the HomePlug AV standard.
The PWR-LINE is a smart power adapter with a built-in USB cable.
This particular device is designed for supported MikroTik products with a microUSB port and PWR-LINE support.
Connect this adapter to your electrical outlet and then connect the USB cable to power your supported MikroTik
device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the
devices will form a connection without needing to install any LAN cables. The device will show up as an additional
Ethernet interface in your routers configuration interface. You can install more PWR-LINE devices to further build
your network.
Connecting
1. Plug one PWR-LINE device into a power socket.
2. Connect the built-in USB cable to the microUSB port of a supported MikroTik router.
3. Plug another PWR-LINE unit (or any other compatible device) somewhere in the same electrical circuit.
Use the sync button to connect the devices and your local network will automatically be extended. See
section Buttons and Jumpers on how to pair additional PWR-LINE devices.
Powering
The device accepts powering directly from 100-230 V ~50/60Hz wall socket it is plugged into. The power
consumption under maximum load can reach 5 W.
Buttons and Jumpers
PWR connection button (sync)
•Hold 0.5 – 3 seconds. For 120 seconds will try to communicate with another PWR-LINE device. A blinking
orange LED light indicates that it is in search mode. You have to also do the same on the other PWR
device, so they can synchronize. Press button again to cancel the search.
•Hold 5 – 8 seconds. A new security key is generated. This is needed to remove a PWR-LINE device from
an existing PWR network.
•Hold 10 – 15 seconds. Resets all PWR related settings.
See for more information. Contact for help. Modified: 11-Feb-19 Document #45868https://mikrotik.com support@mikrotik.com
Probleemoplossing Mikrotik PWR-LINE US
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Merk: | Mikrotik |
| Categorie: | Powerline adapter |
| Model: | PWR-LINE US |