Smart-AVI
AV extender
XT-TX800S
Smart-AVI XT-TX800S Handleiding
Hier is de Smart-AVI XT-TX800S (AV extender) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 544,905.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
© Copyright 2007 Smart-AVI, All Rights Reserved
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use
of this material.
No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.
For the complete manual, visit www.smartavi.com.
Use a single CAT5 cable to broadcast
high resolution SXGA, Stereo Audio
and RS232 up to 4 stations up to
1000ft away.
XT-400
www.smartavi.com
User Manual
2840 N. Naomi Ave.
Burbank, California 91504
Phone: (818) 565-0011
Facsimile: (818) 565-0020
Technical Specifications
3MART!UDIO6IDEO)NTEGRATION
3MART!UDIO6IDEO)NTEGRATION
SNOITACIFICEPS004-TXSNOITACIFICEPS004-TX
SNOITACIFICEPS004-TX
SNOITACIFICEPS004-TXSNOITACIFICEPS004-TX
ataDAGVataDAGV
ataDAGV
ataDAGVataDAGV
tamroFSBVC,C/Y,VUY,BsGR,VHBGR
noituloseR
0021x0091otpU
)AGXS,AGX,AGVS,AG
V
epytrotcennoCtekcos51DH
oiduAoiduA
oiduA
oiduAoiduA
epyTlangiSdecnalabnuoeretS
rotcennoCtekcoskcajmm5.3
232SR232
SR
232SR
232SR232SR
M9BD
.dnG,DXR,DXT
spb0069
rewoPrewoP
rewoP
rewoPrewoP
stnemeriuqeRA5.@CDV5
rotcennoC)ev+retnec(k
cajCDmm1.2
lacisyhPlacisyhP
lacisyhP
lacisyhPlacisyhP
snoisnemiD)sgephtiw1.3(mc7.2x8.11x22
thgieWgk63.rosbl8.
Sending an RS232 command to remoteSending an RS232 command to remote
Sending an RS232 command to remoteSending an RS232 command to remote
Sending an RS232 command to remote
monitormonitor
monitormonitor
monitor
In order to send a command to a remote monitor, you
will need to use The following query at 9600 baud
rate;
<CR>//M1<CR>
After sending this query, any command sent from
the PC will go directly to monitor 1
To send a command to monitor 2 replace "M1"
with "M2" etc...
To send the same command to all monitors ( but
only monitor 1 will answer) Use the following
command;
<CR>//M0<CR>
*
<CR> = Carriage return
In Out In OutRS2 3 2
Out 1-4
Probleemoplossing Smart-AVI XT-TX800S
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Soort: | AV-zender |
| Maximum resolutie: | 1900 x 1200 Pixels |
| Aansluiting voor netstroomadapter: | Ja |