Axxess Niet gecategoriseerd XSVI-1788-NAV

Axxess XSVI-1788-NAV Handleiding

Hier is de Axxess XSVI-1788-NAV (Niet gecategoriseerd) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 389,554.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.

Pagina 1/2

INSTXSVI-1788-NAV

1-800-221-0932 metraonline.com

REV. 9/8/14

INSTXSVI-1788-NAV

1-800-221-0932 metraonline.com

REV. 9/8/14

INSTXSVI-1788-NAV

1-800-221-0932 metraonline.com

REV. 9/8/14

INSTXSVI-1788-NAV

1-800-221-0932 metraonline.com

REV. 9/8/14

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

• ConnecttheBluewiretotheantennaturnonwireoftheaftermarketradio.

• ConnecttheWhitewiretotheleftfrontpositivespeakeroutputofthe

aftermarketradio.

• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakeroutputofthe

aftermarketradio.

• ConnecttheGraywiretotherightfrontpositivespeakeroutputofthe

aftermarketradio.

• ConnecttheGray/Black wiretotherightfrontnegativespeakeroutputofthe

aftermarketradio.

• ConnecttheGreenwiretotheradio’sleftrearpositivespeakeroutput.

• ConnecttheGreen/Blackwiretotheradio’sleftrearnegativespeakeroutput.

• Connectthe Purplewiretotheradio’srightrearpositivespeakeroutput.

• Connectthe Purple/Blackwiretotheradio’srightrearnegativespeakeroutput.

Thefollowingwiresarefortheaftermarketradiosthathavenavigationbuiltin.

• Connectthe Light Greenwiretotheparkingbrakewireoftheaftermarket

navigationradio(ifapplicable).

• ConnecttheBlue/PinkwiretotheVSSorspeedsensewireoftheaftermarket

navigationradio(ifapplicable).

• Connectthe Green/Purplewiretothereversewireoftheaftermarketnavigation

radio(ifapplicable).

• Cyclethekeybyturningtheignitiononfor30seconds,then“off”and“on”againto

testtheradio.

ASWC-1 (if installing)

AftertheXSVIisinitialized,plugintheASWC-1intothe12pinharnessofthe 

XSVI-1788-NAVandrefertotheASWC-1instructions.

FEATURES

• Providesaccessory(12-volt10-amp)

• RetainsR.A.P.(retainedaccessorypower)

• ProvidesNAVoutputs(parkingbrake,reverse,andV.S.S.)

• PrewiredASWC-1harnessincluded(ASWC-1soldseparately)

• Highlevelspeakerinput

• USBupdatable

XSVI-1788-NAV

Dodge/Mercedes/Freightliner accessory and

NAV output CAN harness 2008-up

DODGE

Sprinter (sound 20/50 radio) 2008-2009

MERCEDES

Sprinter(sound 20/50 radio)  2010-up

FREIGHTLINER

Sprinter (sound 20/50 radio)  2008-up

APPLICATIONS

Connections to be made

• ConnecttheYellowwiretotheradio’s12voltbatteryormemorywire.

• ConnecttheBlackwiretotheradio’sgroundwire.

• ConnecttheRedwiretotheignitionwireoftheaftermarketradio.

• ConnecttheOrangewiretotheilluminationwireoftheaftermarketradio.Ifthe

aftermarketradiohasnoilluminationwire,tapeofftheOrangewire.

Caution: Metra recommends disconnecting the negative battery terminal before beginning

any installation. All accessories, switches, and especially air bag indicator lights must be

plugged in before reconnecting the battery or cycling the ignition.

*Note: Refer also to the instructions included with the aftermarket radio.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

• ConnecttheBluewiretotheantennaturnonwireoftheaftermarketradio.

• ConnecttheWhitewiretotheleftfrontpositivespeakeroutputofthe

aftermarketradio.

• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakeroutputofthe

aftermarketradio.

• ConnecttheGraywiretotherightfrontpositivespeakeroutputofthe

aftermarketradio.

• ConnecttheGray/Black wiretotherightfrontnegativespeakeroutputofthe

aftermarketradio.

• ConnecttheGreenwiretotheradio’sleftrearpositivespeakeroutput.

• ConnecttheGreen/Blackwiretotheradio’sleftrearnegativespeakeroutput.

• Connectthe Purplewiretotheradio’srightrearpositivespeakeroutput.

• Connectthe Purple/Blackwiretotheradio’srightrearnegativespeakeroutput.

Thefollowingwiresarefortheaftermarketradiosthathavenavigationbuiltin.

• Connectthe Light Greenwiretotheparkingbrakewireoftheaftermarket

navigationradio(ifapplicable).

• ConnecttheBlue/PinkwiretotheVSSorspeedsensewireoftheaftermarket

navigationradio(ifapplicable).

• Connectthe Green/Purplewiretothereversewireoftheaftermarketnavigation

radio(ifapplicable).

• Cyclethekeybyturningtheignitiononfor30seconds,then“off”and“on”againto

testtheradio.

ASWC-1 (if installing)

AftertheXSVIisinitialized,plugintheASWC-1intothe12pinharnessofthe 

XSVI-1788-NAVandrefertotheASWC-1instructions.

FEATURES

• Providesaccessory(12-volt10-amp)

• RetainsR.A.P.(retainedaccessorypower)

• ProvidesNAVoutputs(parkingbrake,reverse,andV.S.S.)

• PrewiredASWC-1harnessincluded(ASWC-1soldseparately)

• Highlevelspeakerinput

• USBupdatable

XSVI-1788-NAV

Dodge/Mercedes/Freightliner accessory and

NAV output CAN harness 2008-up

DODGE

Sprinter (sound 20/50 radio) 2008-2009

MERCEDES

Sprinter(sound 20/50 radio)  2010-up

FREIGHTLINER

Sprinter (sound 20/50 radio)  2008-up

APPLICATIONS

Connections to be made

• ConnecttheYellowwiretotheradio’s12voltbatteryormemorywire.

• ConnecttheBlackwiretotheradio’sgroundwire.

• ConnecttheRedwiretotheignitionwireoftheaftermarketradio.

• ConnecttheOrangewiretotheilluminationwireoftheaftermarketradio.Ifthe

aftermarketradiohasnoilluminationwire,tapeofftheOrangewire.

Caution: Metra recommends disconnecting the negative battery terminal before beginning

any installation. All accessories, switches, and especially air bag indicator lights must be

plugged in before reconnecting the battery or cycling the ignition.

*Note: Refer also to the instructions included with the aftermarket radio.

Probleemoplossing Axxess XSVI-1788-NAV

Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp

Specificaties

Merk:	Axxess
Categorie:	Niet gecategoriseerd
Model:	XSVI-1788-NAV

Vergelijkbare producten

Axxess AXADCT-4 Handleiding

Niet gecategoriseerd - 2 Pagina's

Axxess AXSUB-GM6 Handleiding

Niet gecategoriseerd - 4 Pagina's

Axxess AXDSPX-GL9 Handleiding