Smart-AVI XT-TX800 Handleiding

Hier is de Smart-AVI XT-TX800 (AV extender) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 544,061.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.

Pagina 1/2
© Copyright 2007 Smart-AVI, All Rights Reserved
Notice
The information contained in this document is
subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular
purpose.
Smart-AVI will not be liable for errors contained herein
or for incidental or consequential damages in
connection with the furnishing, performance or use
of this material.
No part of this document may be photocopied,
reproduced or translated into another language with
out prior written consent from Smart-AVI.
For the complete manual, visit www.smartavi.com.
Use CAT5 cable to broadcast high
resolution SXGA, Stereo Audio, RS232
and IR to 8 stations up to 1000ft
away.
XT-800
www.smartavi.com
User Manual
2840 N. Naomi Ave.
Burbank, California 91504
Phone: (818) 565-0011
Facsimile: (818) 565-0020
Technical Specifications
3MART!UDIO6IDEO)NTEGRATION
3MART!UDIO6IDEO)NTEGRATION
SNOITACIFICEPS008-TXSNOITACIFICEPS008-TX
SNOITACIFICEPS008-TX
SNOITACIFICEPS008-TXSNOITACIFICEPS008-TX
ataDAGVataDAGV
ataDAGV
ataDAGVataDAGV
tamroFSBVC,C/Y,VUY,BsGR,VHBGR
noituloseR
0021x0091otpU
)AGXS,AGX,AGVS,AG
V
epytrotcennoCtekcos51DH
oiduAoiduA
oiduA
oiduAoiduA
epyTlangiSdecnalabnuoeretS
rotcennoCtekcoskcajmm5.3
rewoPrew
oP
rewoP
rewoPrewoP
stnemeriuqeRA5.@CDV5
rotcennoC)ev+retnec(kcajCDmm1.2
lacisyhPlacisyhP
lacisyhP
lacisyhPlacisy
hP
snoisnemiD)sgephtiw1.3(mc7.2x8.11x22
thgieWsbl5.3
Sending an RS232 command to remoteSending an RS232 command to remote
Sending an RS232 command to remoteSending an RS232 command to remote
Sending an RS232 command to remote
monitormonitor
monitormonitor
monitor
In order to send a command to a remote monitor, you
will need to use The following query at 9600 baud
rate;
<CR>//M1<CR>
After sending this query, any command sent from
the PC will go directly to monitor 1
To send a command to monitor 2 replace "M1"
with "M2" etc...
To send the same command to all monitors ( but
only monitor 1 will answer) Use the following
command;
<CR>//M0<CR>
*
<CR> = Carriage return
In Out In Out
RS232
Out 1- 8
IR

Probleemoplossing Smart-AVI XT-TX800

Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp


Specificaties

Kleur van het product: Zwart
Gewicht: 1500 g
Soort: AV-zender
LED-indicatoren: Ja
Ondersteunde video-modi: 1080i, 1080p, 720p
Maximum resolutie: 1920 x 1200 Pixels
VGA (D-Sub)poort(en): 2
Aansluiting voor netstroomadapter: Ja
Audio-ingangen: 1
Audio-uitgang: 1
Externe adapter: Ja
Afmetingen (B x D x H): 220 x 118 x 27 mm
Bandbreedte: 300 MHz
RJ-45 invoer ports: 8
Operating voltage: 5 V
Maximaal bereik: 300 m
Ondersteundende kabel types: Cat5, Cat5e, Cat6, Cat7
Aansluiting type: HD15

Vergelijkbare producten

AV extender - 2 Pagina's
AV extender - 2 Pagina's
AV extender - 8 Pagina's
AV extender - 32 Pagina's
AV extender - 2 Pagina's
AV extender - 2 Pagina's
AV extender - 10 Pagina's
AV extender - 8 Pagina's
AV extender - 32 Pagina's
AV extender - 32 Pagina's
AV extender - 2 Pagina's
AV extender - 2 Pagina's