StarTech.com
USB Hub
HB30A10AME
StarTech.com HB30A10AME Handleiding
Hier is de StarTech.com HB30A10AME (USB Hub) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 620,296.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 5, 2019 4:02 PM
Product Diagram (HB30A10AME)
Component Function
12-Wire Terminal Block
• Used to connect an external DC Power Source
(7~24V DC Input) to the .Hub
2Screw Locks (x 10)
• Used to securely lock a to the USB Device
USB-A Port Hub on the .
• Center to center 19 Screw Lock Dimensions:
mm, thread size 4 - 40.
3Power LED
• : Indicates that the Hub is receiving Green
power.
4USB-B Host Port
• Used to connect a to the .Host Computer Hub
• Center to center 24 Screw Lock Dimensions:
mm, thread size 4 - 40.
5USB-A Ports (x 10)
• Used to connect ( x 10) to the USB Devices
Hub.
• Used to charge connected .USB-A Devices
• USB-A Ports support surge and 15KV ESD
(Electrostatic Discharge) Protection.
10-Port Industrial USB 3.0 (5 Gbps) Hub | USB 3.1 Gen 1 to 10x USB-A | ESD & Surge Protection
3
Requirements
For the latest requirements, please visit . www.startech.com/HB30A10AME
• Phillips Head Screwdriver
• Writing Utensil
• Level
• Mounting Screws (x 2)
Installation
Notes: It is recommended to use an external (+7 - 24V DC)DC Power Source
connected to the to ensure sucient power/current is 2-Wire Terminal Block
delivered to each on the . USB-A Port Hub
The can also be powered by a Hub Host Computer USB-B Host connected to the
Port, when using low power consuming USB Devices.
Powering the Hub Using the Universal Power Adapter
1. Connect the to the and to a Universal Power Adapter Terminal Block AC
Electrical Outlet.
2. Connect a (the end will depend on USB Port you are USB-B to USB Cable
connecting to) to the and to a USB port on the .USB-B Host Port Host Computer
3. The should detect the and automatically Host Computer’s Operating System Hub
install it.
4. Connect your to the (x 10) on the .USB Devices USB-A Ports Hub
Powering the Hub Using USB
1. Connect a (the end will depend on USB Port you are USB-B to USB Cable
connecting to) to the and to a USB port on the .USB-B Host Port Host Computer
2. The should detect the and automatically Host Computer’s Operating System Hub
install it.
3. Connect your to the (x 10) on the .USB Devices USB-A Ports Hub
Powering the Hub Using the 2-Wire Terminal Block
1. Remove the from the .Terminal Block Connector Housing Hub’s Casing
2. Using a small screwdriver (Phillips or Flat Head), loosen the screws on the Terminal
Block Connectors.
4
5
2
1
Probleemoplossing StarTech.com HB30A10AME
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Gewicht: | 352 g |
| Breedte: | 55 mm |
| Diepte: | 198 mm |
| Hoogte: | 30 mm |
| Gewicht verpakking: | 1400 g |
| Breedte verpakking: | 190 mm |
| Diepte verpakking: | 295 mm |
| Hoogte verpakking: | 70 mm |
| LED-indicatoren: | Stroom |
| Stroom: | 1.4 A |
| Meegeleverde kabels: | USB |
| Inclusief AC-adapter: | Ja |
| Certificering: | RoHS, REACH, CE, FCC, TAA |
| Plug and play: | Ja |
| Aantal per verpakking: | 1 stuk(s) |
| Ingangsspanning: | 100 - 240 V |
| Soort voeding: | AC |
| Temperatuur bij opslag: | -20 - 85 °C |
| Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A: | 10 |
| Output current: | 3.25 A |
| Spanning: | 20 V |
| Snelle installatiehandleiding: | Ja |
| Mean time between failures (MTBF): | 126106 uur |
| Hostinterface: | USB 3.2 Gen 1 (3.1 Gen 1) Type-B |
| Chipset: | Genesys Logic - GL3523 |
| (Buitenste) hoofdverpakking hoogte: | 320 mm |
| (Buitenste) hoofdverpakking breedte: | 400 mm |
| (Buitenste) hoofdverpakking lengte: | 510 mm |
| Hoeveelheid per (buitenste) hoofdverpakking: | 14 stuk(s) |
| Overdrachtssnelheid: | 5000 Mbit/s |
| Stroomverbruik (typisch): | 65 W |
| Bedrijfstemperatuur (T-T): | 0 - 70 °C |
| Relatieve vochtigheid in bedrijf (V-V): | 5 - 95 procent |
| Code geharmoniseerd systeem (HS): | 84719000 |
| Aantal poorten: | 10 |
| Spanningsbeveiliging: | Ja |
| Inbegrepen soorten voedingsstekkers: | ANZ, EU, JP, NA, UK |
| Hub-interfaces: | USB 3.2 Gen 1 (3.1 Gen 1) Type-A |
| Klemmenblokpoort: | Ja |
| UASP-ondersteuning: | Ja |
| DIN-railset inbegrepen: | Ja |