StarTech.com
Netwerkkaart/adapter
P011GI-NETWORK-CARD
StarTech.com P011GI-NETWORK-CARD Handleiding
Hier is de StarTech.com P011GI-NETWORK-CARD (Netwerkkaart/adapter) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 563,622.0 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: June 1, 2023
Product Diagram
P011GI-NETWORK-CARD
Port/LED/Connector Function
1 Bracket
• Secures the card to the Host Computer Case
• The Full Prole Bracket comes pre-installed
2 Open SFP Slot
• Add a MSA-Compliant SFP Transceiver Module
• Supports Fiber or Ethernet 1 Gbps SFPs
3 LED Indicators
• Left LED Indicator is Link Speed
• Solid Green: 1 Gbps
• Right LED Indicator is Link Status
• Solid Green: Active link
• Flashing Green: Activity
4 PCIe 2.1 p1-x1 Connector • Insert into a PCI Express Slot on the Host Computer
Package Contents
• Open SFP Network Card x 1
• Low-Prole Bracket x 1
• Quick-Start Guide x 1
2
1-Port Open SFP Gigabit Network Card
Requirements
For the latest requirements, please visit www.startech.com/P011GI-NETWORK-CARD
• Host computer with an available PCI Express 2.0 or greater slot (x1, x2, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
Static Electricity can severely damage PCI Express Cards. Ensure that you are
adequately Grounded before you open your Host Computer Case or touch the PCI
Express Card. You should wear an Anti-Static Strap or use an Anti-Static Mat when
installing any Host Computer component. If an Anti-Static Strap isn’t available,
discharge any built-up static electricity by touching a large Grounded Metal Surface
for several seconds. Only handle the PCI Express Card by its edges and don’t touch
the gold connectors.
1. Turn o the Host Computer and any Peripheral Devices that are connected to it
(e.g. printers, external hard drives, etc.).
2. Unplug the Power Cable from the back of the Host Computer.
3. Disconnect any Peripheral Devices that are connected to the Host Computer.
4. Remove the Cover from the Host Computer Case. Consult the documentation that
came with the Host Computer for details about doing this safely.
5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate
from the back of the Host Computer Case.
Note: Consult the documentation that came with the Host Computer for details
about doing this safely. This card works in PCI Express x1, x2, x4, x8, or x16 Slots.
6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the
Bracket to the back of the Host Computer Case.
Note: If you install the PCI Express Card into a Small Form Factor or a Low Prole
Desktop System, it may be necessary to replace the pre-installed standard
Full Prole Bracket with the included Low Prole Bracket.
7. Return the Cover onto the Host Computer Case.
8. Insert a compatible 1G SFP Transceiver Module, into the SFP Slot onto the PCI
Express Card.
9. Reconnect the Power Cable to the back of the Host Computer.
3
*Product may vary from image
1
4
Probleemoplossing StarTech.com P011GI-NETWORK-CARD
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Gewicht: | 40 g |
| Breedte: | 67 mm |
| Diepte: | 87 mm |
| Hoogte: | 16 mm |
| Gewicht verpakking: | 47.5 g |
| Breedte verpakking: | 170 mm |
| Diepte verpakking: | 142 mm |
| Hoogte verpakking: | 30 mm |
| LED-indicatoren: | Speed, Status |
| Connectiviteitstechnologie: | Bedraad |
| Interface: | Fiber |
| Netwerkstandaard: | IEEE 802.1AX, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3ap, IEEE 802.3az, IEEE 802.3z |
| Temperatuur bij opslag: | -10 - 70 °C |
| Intern: | Ja |
| Ondersteunde netwerkprotocollen: | IPv4, IPv6, TCP/UDP |
| Ondersteunt Linux: | Ja |
| Snelle installatiehandleiding: | Ja |
| Hostinterface: | PCI Express |
| Maximale overdrachtssnelheid van gegevens: | 1000 Mbit/s |
| Ondersteunde server operating systems: | Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019, Windows Server 2022 |
| Montagebeugels meegeleverd: | Ja |
| Jumbo Frames ondersteuning: | Ja |
| Full duplex: | Ja |
| Component voor: | PC |
| (Buitenste) hoofdverpakking hoogte: | 385 mm |
| (Buitenste) hoofdverpakking breedte: | 605 mm |
| (Buitenste) hoofdverpakking lengte: | 325 mm |
| Hoeveelheid per (buitenste) hoofdverpakking: | 80 stuk(s) |
| Auto MDIX IEEE: | Ja |
| Stroomverbruik (typisch): | 0.6 W |
| Bedrijfstemperatuur (T-T): | 0 - 50 °C |
| Relatieve vochtigheid in bedrijf (V-V): | 5 - 90 procent |
| Jumbo frames: | 9000 |
| Vezel-optische connector: | SFP |
| Fibre channel-poorten: | 1 |
| PCI versie: | 2.1 |