StarTech.com
Geheugenkaartlezer
2SD4FCRU3
StarTech.com 2SD4FCRU3 Handleiding
Hier is de StarTech.com 2SD4FCRU3 (Geheugenkaartlezer) gebruikershandleiding. 2 pagina's in taal Engels met een gewicht van 0.2 Mb. Als u geen antwoorden op uw probleem kunt vinden Vraag het onze community.
Pagina 1/2
Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 09/28/2016
For the latest information, technical speci cations, and support for
this product, please visit www.StarTech.com/2SD4FCRU3.
Packaging contents
• 1 x dual-slot SD™ card reader
• 1 x quick-start guide
System requirements
This converter is OS independent and doesn’t require any additional
drivers or software.
System requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/2SD4FCRU3.
2SD4FCRU3
Dual-Slot SD Card Reader - USB 3.0 - SD 4.0, UHS II
*actual product may vary from photos
Introduction
You can use the 2SD4FCRU3 to simultaneously access one or two
SD, SDHC™ (Secure Digital High Capacity), or SDXC™ (Secure Digital
Extended Capacity) cards, and leverage read and write functionality
for les such as documents, spreadsheets, slide shows, images,
videos, and music. The 2SD4FCRU3 delivers USB 3.0 performance,
which provides transfer speeds up to 5Gbps. The 2SD4FCRU3 also
features an integrated USB Type-A cable for added protection and
increased portability.
Product diagram
USB Type-A connector Slot 1
AUX Micro B
power port
Slot 2
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard
o ers speeds up to 5Gbps.
Use the SD card reader
To access the data stored on your SD card or cards, complete the
following:
1. Hold the SD card so that the label is facing up and insert your SD
card into Slot 1 on the 2SD4FCRU3.
2. If necessary, insert a second SD card into Slot 2 on the
2SD4FCRU3.
3. Connect the integrated USB Type-A connector on the
2SD4FCRU3 to the USB port on your host device.
4. Access the data that’s stored on the SD card or cards.
Connect an auxiliary power source
If you require additional power when you use the 2SD4FCRU3,
connect the USB cable on your power source to the AUX Micro B
power port on the 2SD4FCRU3.
Important: Read and understand the entire manual
before you use this product, and follow the instructions
as they are outlined in the manual.
Failure to do so could result in property damage or device
failure.
Probleemoplossing StarTech.com 2SD4FCRU3
Als je de handleiding al zorgvuldig hebt gelezen maar geen oplossing voor je probleem hebt gevonden, vraag dan andere gebruikers om hulp
Specificaties
| Kleur van het product: | Zwart |
| Gewicht: | 57 g |
| Breedte: | 69.5 mm |
| Diepte: | 106 mm |
| Hoogte: | 13.5 mm |
| Gewicht verpakking: | 142 g |
| Breedte verpakking: | 144 mm |
| Diepte verpakking: | 174 mm |
| Hoogte verpakking: | 32 mm |
| Materiaal behuizing: | Kunststof |
| Type stroombron: | USB |
| Compatibele geheugenkaarten: | MMC, SD, SDHC, SDXC |
| Snelstartgids: | Ja |
| Certificering: | CE, FCC, RoHS, TAA |
| Plug and play: | Ja |
| Temperatuur bij opslag: | -20 - 70 °C |
| Intern: | Nee |
| Micro-USB 2.0 ports hoeveelheid: | 1 |
| Output current: | 2000 mA |
| Spanning: | 5 V |
| Soort aansluiting: | USB 3.2 Gen 1 (3.1 Gen 1) |
| Chipset: | Genesys Logic - GL3215, GL3522 |
| Overdrachtssnelheid: | 5000 Mbit/s |
| Bedrijfstemperatuur (T-T): | 0 - 40 °C |
| Relatieve vochtigheid in bedrijf (V-V): | 5 - 90 procent |
| Geïntegreerde USB-kabel: | Ja |